RF_SENTINEL

rf_sentinel / guides / tetra-hunter-alternative

Tetra Hunter alternative

Tetra Hunter is a paid Android app that uses two RTL-SDR dongles to detect TETRA radios, the encrypted digital radios emergency services carry in much of Europe. RF Sentinel detects TETRA radios the same way for free, with its full source on GitHub: one dongle to start, a second or third to watch the band nonstop, and police, camera and tracker detection on top.

Side by side

RF SentinelTetra Hunter
PriceFree, no ads, no accountSubscription: about €30 for 6 months, €50 a year or €90 lifetime
LicenseGPL-3.0, full source on GitHubClosed source
DonglesWorks with one RTL-SDR; a second (and third) watches the TETRA band nonstopTwo RTL-SDRs
TETRA burst detectionYes, by the time-slot rhythm, 380-385 MHzYes
Signal meterTETRA bar on the main screen: Far / Closer / Very close, with a getting-closer arrowYes
Beeps that speed up when closerYesYes
City / highway modeCity mode (a stronger signal needed)Yes
TETRA only modeYes: every dongle on 380-385 MHzDedicated app
Other police bands (P25, DMR, NXDN, 700 / 800 MHz)Yes, with an SDRSee vendor
Police body cams, Flock ALPR, patrol vehicles over Bluetooth / WiFiYes, no SDR neededSee vendor
Speed and ALPR camera mapYes, offlineSpeed cameras (from V1.9)
Android AutoYesSee vendor
Decodes TETRA / breaks encryptionNo: energy and timing onlyNo

Tetra Hunter details come from its public pages at the time of writing; "see vendor" means we couldn't verify it. RF Sentinel is independent and not affiliated with Tetra Hunter or its developer.

Hunting TETRA radios with RF Sentinel

  1. Plug an RTL-SDR (RTL-SDR Blog V3 or V4) into the phone with a USB OTG adapter and turn on Detect TETRA radios in Settings → RTL-SDR radio.
  2. For nonstop watching, add a second RTL-SDR through a powered USB hub. It watches 380-385 MHz while the first keeps sweeping; a third splits the band with it (380-382.4 and 382.6-385 MHz). The status line shows what each one watches.
  3. Antenna: a vertical whip about 19.5 cm long (a quarter wave), on the roof if you can. Two dongles share one antenna through a 2-way splitter.
  4. Turn on TETRA only to put every dongle on the TETRA band, and City mode in towns full of radios.
  5. While a radio is heard, the TETRA bar on the main screen shows how strong it is (Far / Closer / Very close) and the beeps speed up as you get closer.

Every setting is explained in the RTL-SDR guide.

Questions

Is there a free alternative to Tetra Hunter?

Yes. RF Sentinel is free and open source (GPL-3.0): no subscription, no account. With an RTL-SDR dongle it watches the TETRA handset band (380-385 MHz) for the time-slot bursts TETRA radios send, and with a second or third dongle it watches that band nonstop.

How does a TETRA detector work?

TETRA handsets and car radios transmit on 380-385 MHz in short time slots: a burst of about 14 ms every 57 ms. RF Sentinel measures the energy on each 12.5 kHz channel and reports only bursts with that rhythm, so plain carriers and other radios don't count. It doesn't decode anything, and TETRA's encryption isn't touched.

What hardware do I need?

For RF Sentinel, an Android phone with USB OTG and one RTL-SDR dongle (an RTL-SDR Blog V3 or V4, for example) is enough to start. For hunting, add a second dongle on a powered USB hub: it watches the band nonstop while the first keeps sweeping the other bands. Use a vertical antenna about 19.5 cm long, on the roof if you can; two dongles can share it through a 2-way splitter.

Does it work in France or Switzerland?

No, RF Sentinel doesn't, and neither does Tetra Hunter: those countries use TETRAPOL, a different system. TETRA detection works where emergency services use TETRA on 380-385 MHz, which covers most of Europe and many other countries.

Join the DiscordHelp, ideas, new signatures, field captures and ESP32 builds. CIS-C0/RFSentinel on GitHubSource code, releases, issues. A star helps others find it.